Six3Tile is engineered from PVC (Polyvinyl Chloride) sheets and finished with a proprietary coating to mimic the look and feel of ceramic tile.

Six3Tile is a tile alternative engineered to simplify the renovation process with tile shower kits save installers time. Instead of placing individual tiles, installers adhere Six3Tile bathroom tile sheets, or panels, to the wall with basic construction adhesive. The panels are pre-cut with the desired tile pattern, guaranteeing perfectly installed patterns.

Yes, Six3Tile has gone through extensive 3rd Party testing to prove its durability and watertight seal. Visit this webpage for a copy of the reports that include surface hardness testing, discoloration over time as well as the products watertight seal. 

Six3Tile panels are made to last and are covered by a 5-year warranty.

Our products are very durable and the surface is not easily scratched. Six3Tile products score well in hardness rating and chip resistance.

See our product specification documents for specific results.

No, but you would need a circular or oscillating saw to cut the panel with a fine tooth blade.

Any unsanded or non-sanded grout can be used with Six3Tile products. Sanded grouts will scratch the surface of the product. Avoid pre-mixed group because it can sometimes have abrasive additives that will scratch the product even if not explicitly stated.

The following are recommended adhesives: Loctite® Power Grab® Heavy Duty Construction Adhesive and Manus-Bond 75-AM Industrial adhesive. Adhesive is not included in the kit.

You would install the new tile with about an 1" of overhang and the tile edge trim would be a thicker profile to cover the gap. We recommend using an L-shaped tile edge trim. You’ll need to calculate the depth of your current tile thickness and add 1/4” for Six3Tile.

Most Six3Tile customers in multifamily construction, manufactured housing etc order 1/4" (6mm) thick. If you're a homeowner and ordering from our shop site (shop.six3tile.com), our panels are 4mm thick.

While our products are priced higher than individual tiles, we install 2 times faster than standard tile installation. We usually see the biggest savings when compared to a contractor installation since our products require much less labor hours than standard tile installation.

Our products are compatible with niches. You would want to follow the niche manufacturer install recommendations. We find that no-tile niches work well with our products to avoid making smaller cuts, but a tile niche can certainly be done as well!

Project timelines depend on the scope and requirements. Small tasks can be completed within a few days. Larger projects may take one to two weeks. We always share a clear timeline before starting.

Six3Tile tile shower kits should be wiped clean with a clean damp cloth or non-abrasive sponge. Do not use the scrubber side of dual-action sponges as this will scratch and mar the tile surface. Do not use wax-based or oil-based cleaners to bring out the shine because the chemicals in those products can harm the surface over time. We recommend using denatured alcohol to bring out the original shine of the tile.

No, we do not supply or sell edge trim. But any standard tile edge trim is compatible with our products. We typically recommend the Schluter brand which can be purchased at Lowes or Home Depot.

Six3Tile panels can be grouted immediately, saving valuable time during the installation process. In a 3rd party time study, Six3Tile performed at 2x faster installation compared to traditional ceramic tile.

While it depends on your type of stove, we have a solution for every option! If you do require a heat resistant panel in your pack, you’ll need to speak with customer service to place the order at info@six3tile.com Check out our blog on heat sources for more information.

Our lead times vary based on what product you are ordering. Can you tell me the color and pattern you are considering?

Please reach out to support@six3tile.com for sizing options and we'd be happy to assist you.

Six3Tile panels have a grout line of 1/8”.

Our product allows you to install directly over existing tile which can save time and money without needing to demo the old tile.

Six3Tile panels come in glossy and matte finishes

No, currently Six3Tile products are only approved for vertical applications.

Not a problem, watch this video on how to replace a damaged tile. It’s quick and easy and anyone can perform the repair.

We can do any pattern but would require a minimum order of 10 kits or more to do a custom pattern outside of our standard.

Six3Tile has assortment of pattern and color options in our standard offering. You can mix these as you wish, but once you design a different pattern or choose a color not listed in the standard offering, it is considered a custom order.

We utilize Sherwin-Williams’ professional line of coatings with over 1,500 color options and our production process allows for near limitless custom patterns to bring your vision to life.

Our tile panels come a variety of colors. From our classic collection we have: High Reflective White (SW 7757), Passive Gray (SW 7064), Software (SW 7074) and Drift of Mist (SW 9166). We also have an ecotones collection comprised of: Iron Ore (SW 7069), Universal Khaki (SW 6150), Stargazer (SW 9635) and Marine (SW 9659). However, we're always seeking out feedback on expanding our color offering for future products!

Use edge trim for the corners and exposed ends. Any standard tile edge trim is compatible with our products. We typically recommend the Schluter brand which can be purchased at Lowes or Home Depot.

Our products are tile panels. You can purchase at Shop.Six3Tile.com. If you need assistance estimating how much product to purchase, feel free to reach out to me at info@six3tile.com for assistance.

Six3Tile offers a 5-year limited warranty for all product lines. See full details here: six3tile.com/warranty